Posts Tagged ‘How to’
Angle Adjustable Knee Joint – How do I change it?
This video demonstrates how to change the angle of a Seating Dynamics Footrest using the Angle Adjustable Knee Joint. Dynamic Footrests: http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/ Static Footrests: http://www.seatingdynamics.com/footrests/static-footrests/
Continue ReadingDetermining if Dynamic Head Support Hardware is Appropriate
In general, if a client has moderate to significant neck extension, is seeking movement, and/or has a history of equipment breakage, Dynamic Head Support Hardware may be appropriate. However, trialing this equipment can be challenging. How do you determine if this intervention is appropriate without actually trying it? In this video, you will see that…
Continue ReadingSeating Dynamics – How to measure for our dynamic footrest
This video demonstrates key measurements needed to order a Seating Dynamics Dynamic Footrest. Product Info: http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/
Continue ReadingSeating Dynamics Dynamic Rocker Back interface changes
Seating Dynamics is always looking for a way to improve our products. The latch plate is now red and labeled to improve appropriate use of the locking feature. Product Info: http://www.seatingdynamics.com/dynamic-rockerback/ Case Study / Blog: http://www.seatingdynamics.com/2018/05/30/the-dynamic-rocker-back-interface-when-should-i-lock-it-out/
Continue ReadingSeating Dynamics Footrest Adapter
The new Seating Dynamics footrest adapter will allow you to install any of the Seating Dynamics footrests on to many different wheelchairs. Cast Study / Blog: http://www.seatingdynamics.com/2018/05/02/faq-can-dynamic-seating-be-used-on-any-wheelchair/ Dynamic Footrest: http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/ Static Footrest: http://www.seatingdynamics.com/footrests/static-footrests/
Continue ReadingSeating Dynamics One Piece Flip Up Footboard
Footboards are sometimes used as an alternative to separate Footplates. The Seating Dynamics Footboard can be used with the wheelchair manufacturer’s footrest hangers, our Static Footrests or our Dynamic Footrests. The Footboard flips up for transfers. Dynamic Footrests: http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/ Static Footrests: http://www.seatingdynamics.com/footrests/static-footrests/
Continue ReadingSeating Dynamics Footrests – changing angles and holding position
Our Static and Dynamic Footrests offer easy angle adjustments at the knee and ankle in a wide range of angles. Once adjusted, our hardware will not move or break. Dynamic Footrest: http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/ Static Footrest: http://www.seatingdynamics.com/footrests/static-footrests/
Continue ReadingUsing the PN 6100 Back Cane Saw and Drill Jig to prepare to install the DRBi
Some wheelchairs are available with the DRBi already installed. Otherwise, you will need to install the Dynamic Rocker Back by shortening the back-canes by a few inches to achieve the desired back height. We have created a tool, the PN 6100, to help do just this. For written instructions, visit http://www.seatingdynamics.com/how-to-install-dynamic-rocker-back/
Continue ReadingSeating Dynamics – How to adjust the anti-rotation screw
The lower portion of the Seating Dynamics Dynamic Footrest may rotate in relation to the upper portion. If this occurs, please watch this video for instructions on adjusting the anti-rotation screw. For more information about our Dynamic Footrests, please go to http://www.seatingdynamics.com/footrests/dynamic-wheelchair-footrests/
Continue ReadingNew Back Cane Saw & Drill Jig Simplifies DRBi Installation
Seating Dynamics Dynamic Rocker Back interface (DRBi) provides movement in response to client forces. These forces are stored and then return the client to a neutral starting position. This Dynamic Back has many clinical applications, but first it must be correctly mounted to a wheelchair base.
Continue Reading