No, the armrests which attach to the back canes (flip-up) must be removed. These can be replaced with a single or dual post armrest.
The elastomers last approximately 2 years, depending on the frequency and forces applied. We have a “re-build kit” which includes upper and lower elastomers, as well as plastic caps for the top of the elastomers. These can be purchased and installed by your wheelchair supplier.
Call or visit your supplier.
Depending on the wheelchair model, installation usually takes an hour or less.
Yes. The seat to back angle is adjustable through the wheelchair manufacturer brackets, if this is a standard or added feature. If Seating Dynamic brackets are used, the seat to back angle can be adjusted 80 – 120 degrees, depending on the base.
No, a DRBi is flush with the front of the back post.
Yes. New back canes need to be ordered either from the wheelchair manufacturer or from Seating Dynamics, after which the DRBi can be installed.